[SMS]

Busta · -{ D.O.N.A.T.O.R. }- Joined: 13 Aug 2007 Posts: 81

Hello, I updated just slapt-get now I get the following error>>

slapt-get: error while loading shared libraries: libcrypto.so.1: cannot open shared object file: No such file or directory

Do you have a direct link to that file on your site where I can wget and install with installpkg

thanks

gerasimos_h · Posted: Tue Jul 31, 2012 10:19 am Post subject:

You need to update other packages too, like OpenSSL and gnutls.

that package will remove the error, but you need to install all three

http://sms.it-ccs.com/isos/SMS-Current/slackware/a/openssl-solibs-1.0.1c-i486-1sms.txz
http://sms.it-ccs.com/isos/SMS-Current/slackware/n/openssl-1.0.1c-i486-1sms.txz
http://sms.it-ccs.com/isos/SMS-Current/slackware/n/gnutls-3.0.21-i486-1.txz

Use upgradepkg and once you done you will need to upgrade packages with slapt-get and don't forget to install new packages, like nettle, p11-kit e.t.c.

gerasimos_h

Busta · -{ D.O.N.A.T.O.R. }- Joined: 13 Aug 2007 Posts: 81

Thanks , that was the solution to get slapt-get working.
Once I updated the remaining packages, and the excludes, ran lilo, and successfully booted to the 3.2.24 smp kernel, I see errors/warnings, about config files and shared libraries, that scroll by the screen. The libkmod, I believe, was showing an error.
Network now does not work, and can not use a keyboard (USB) at the console login prompt.

Anyway to add these missing shared libraries?

gerasimos_h · Posted: Tue Jul 31, 2012 4:28 pm Post subject:

Have you install new packages libcroco and libffi?
From which version you upgraded?
kmod replaced module-init-tools a few updates back, so you must uninstall module-init-tools and install kmod.

gerasimos_h

Busta · -{ D.O.N.A.T.O.R. }- Joined: 13 Aug 2007 Posts: 81

Did not install those ( libcroco and libffi). How are new packages identified? When I do a slapt-get -u then slapt-get --upgrade, I only see packages that require an update. Is there a link to the list of new packages that should be installed.
I did install nettle, p11-kit e.t.c., Obviously, the e.t.c part of your post was critical. Smile

Can I install those packages using the live cd?

thanks

gerasimos_h · Posted: Tue Jul 31, 2012 5:15 pm Post subject:

Usually with slapt-get -dist-upgrade you get new packages too.
The most appropriate method is by checking ChangeLog.txt
x86
http://sms.it-ccs.com/isos/SMS-Current/ChangeLog.txt
x86_64
http://sms.it-ccs.com/isos/SMS64-Current/ChangeLog.txt

You can boot from LiveCD or from NativeCD (installer) and mount partitions e.g.
if your root partitions is /dev/sda1 and boot partition is /dev/sda2

Busta · -{ D.O.N.A.T.O.R. }- Joined: 13 Aug 2007 Posts: 81

Booting from live cd 1.6.6 x32 , the /dev/sda1 is already mounted /mnt/sda1 (which includes boot)

I have configured networking, and can ping my gateway. Can I do a slapt-get -i and update/add those packages?

Busta · -{ D.O.N.A.T.O.R. }- Joined: 13 Aug 2007 Posts: 81

Ahh - I just chroot /mnt/sda1 and installed the packages with slapt-get -i. That worked.
Now, when I do a slapt-get --dist-upgrade it wants to reinstall the slapt-get package. I select y, it re-install's slapt-get, and rerun (slapt-get -u ; slapt-get --dist-upgrade, get same re-install prompt. bug?
Also should kernel-firmware be updated from the excludes?
thxs

gerasimos_h · Posted: Tue Jul 31, 2012 8:28 pm Post subject:

Kernel-firmware is a must update, since it includes all the kernel firmware.
From kernel 3.2.24 I started deleting firmware built during compile and all firmware included in kernel-firmware package.

I know about slapt-get issue, but didn't check for it, I ignore it since doesn't make any difference, I'll check it someday.

rcS from sysvinit-scripts-2.0 has a typo and might be the reason you are not having all modules in place, I'll update in a few minutes...

gerasimos_h

miharix · Junior Member Joined: 09 Nov 2011 Posts: 8

Hi,

very noob question.

What is the correct order of commands to update Kernel AND/OR Packages?

When I tried after clean install (2.0.3 x64 on RAID6)

gerasimos_h · Posted: Tue May 07, 2013 2:27 pm Post subject:

To update packages just use
to install the certificate

miharix · Junior Member Joined: 09 Nov 2011 Posts: 8

gerasimos_h thanks for your great help!

When I run

gerasimos_h · Posted: Wed May 08, 2013 10:21 am Post subject:

I just check sources and didn't have any problem with htop...

miharix · Junior Member Joined: 09 Nov 2011 Posts: 8

I tried now

gerasimos_h · Posted: Wed May 08, 2013 12:17 pm Post subject:

GPG-KEY for SMS64-Current is missing indeed, I'll add it, so it will sync in a while, although it doesn't make any difference as it's the same key with main repo, so you already have it to verify signatures.

Try to delete all the contents in /var/slapt-get/
and try again to update sources...

gerasimos_h