Log inUsernamePassword
Log me on automatically each visit    
Register
Register
Log in to check your private messages
Log in to check your private messages
SMS Forum Index » Suggestions

Post new topic   Reply to topic
Start squid proxy Goto page 1, 2  Next
View previous topic :: View next topic  
Author Message
Busta
-{ D.O.N.A.T.O.R. }-


Joined: 13 Aug 2007
Posts: 81

PostPosted: Fri Apr 13, 2012 6:05 pm    Post subject: Start squid proxy Reply with quote

Any specific user Squid needs to be started as? Will not start as root and creating squid (effective user) user also does not allow starting

This is a new 1.6.5 native install

/etc/rc.d/rc.squid: Permission denied when using webmin to start and after init the cache. - thxs
Back to top
View user's profile Send private message
Busta
-{ D.O.N.A.T.O.R. }-


Joined: 13 Aug 2007
Posts: 81

PostPosted: Fri Apr 13, 2012 6:35 pm    Post subject: Reply with quote

never mind - rc.squid was not set to execute. /etc/rc.d/rc.squid

Should this not already be set if you have selected to install squid?
Back to top
View user's profile Send private message
baboo
Senior Member


Joined: 04 Sep 2007
Posts: 676

PostPosted: Fri Apr 13, 2012 7:41 pm    Post subject: Reply with quote

good catch! Also, clamd and dansguardian were not executable. On my download.
Back to top
View user's profile Send private message
Busta
-{ D.O.N.A.T.O.R. }-


Joined: 13 Aug 2007
Posts: 81

PostPosted: Fri Apr 13, 2012 9:18 pm    Post subject: Reply with quote

yep - same here.
Back to top
View user's profile Send private message
gerasimos_h
Site Admin


Joined: 09 Aug 2007
Posts: 1757
Location: Greece

PostPosted: Fri Apr 13, 2012 10:01 pm    Post subject: Reply with quote

squid and dansguardian have entries in /etc/rc.d/rc.M, so if they are executable they will start by default, and since proxy server and content filtering isn't a common setup I left them out by default.
They need further setup anyway, so if you are going to use them you will have to make them executable too.

As for rc.clamd it's a left over of my slackbuild, we use rc.clamav Smile

gerasimos_h

_________________
Superb! Mini Server Project Manager
http://sms.it-ccs.com
Back to top
View user's profile Send private message Visit poster's website
Ansy
Member


Joined: 24 Feb 2011
Posts: 42
Location: RUSSIA

PostPosted: Mon Sep 24, 2012 7:55 am    Post subject: Is Squid url_regex broken? Reply with quote

I've made a proxyarp-server for redirecting HTTP to transparent proxy in private organisation. Old (4 years in production) Slackware-based server does it just fine for now. SMS1.6.6-based one with the same Squid options transparently proxying too... but doesn't do url_regex and dstdom_regex filtering at all Sad Nothing in logs -- no DENIED items, no errors.
Code:
acl gam dstdom_regex www.gambling.com
acl shit url_regex sex\.com
acl ournet src 192.168.253.0/24
http_access allow ournet !shit !gam
Upgrading via slapt-get doesn't help.
Anybody who are using Squid, please test url_regex acl, is it really broken now?

_________________
In CODe we TRUST!
Back to top
View user's profile Send private message ICQ Number
gerasimos_h
Site Admin


Joined: 09 Aug 2007
Posts: 1757
Location: Greece

PostPosted: Mon Sep 24, 2012 3:15 pm    Post subject: Reply with quote

I just test 1SMS-1.6.6, and I don't seem to have a problem with url_regex, I get "Access Denied"

Have you copy configuration from old slackware server to SMS?
Which version of squid was running in the old server?

Can you post your squid.conf?


gerasimos_h

_________________
Superb! Mini Server Project Manager
http://sms.it-ccs.com
Back to top
View user's profile Send private message Visit poster's website
Ansy
Member


Joined: 24 Feb 2011
Posts: 42
Location: RUSSIA

PostPosted: Thu Sep 27, 2012 7:51 am    Post subject: Squid url_regex works! Reply with quote

Well, my fault, sorry... Embarassed

I've found working uncommented http_access allow localnet just before my own ACLs. Commenting it solves the problem, because localnet defined much upper as all RFC1918, and my addresses requests passed through without any url_regex filtering.

Now I'm trying to setup lightsquid, but that's another sad story... GD.pm Perl module doesn't pass tests Confused

_________________
In CODe we TRUST!
Back to top
View user's profile Send private message ICQ Number
gerasimos_h
Site Admin


Joined: 09 Aug 2007
Posts: 1757
Location: Greece

PostPosted: Thu Sep 27, 2012 10:11 am    Post subject: Reply with quote

I rebuilt perl-modules package to include GD, GD::Graph and GDTextUtils.
I'm syncing repos now, soon you will be able to upgrade the package...

lightsquid it's about 60KB so I might add it as a package in SMS...

gerasimos_h

_________________
Superb! Mini Server Project Manager
http://sms.it-ccs.com
Back to top
View user's profile Send private message Visit poster's website
Ansy
Member


Joined: 24 Feb 2011
Posts: 42
Location: RUSSIA

PostPosted: Fri Sep 28, 2012 12:26 pm    Post subject: lightsquid Reply with quote

Great many thanks, gerasimos_h! Smile

But for now I can't confirm this trouble solved, because of after some slapt-gets my lightsquid installation complies:
Quote:
no: GD.PM found, please install or set $graphreport=0 to disable
and manually GD making still prints:
Code:
root@sms:/tmp/GD-2.46# perl Makefile.PL
Notice: Type perl Makefile.PL -h for command-line option summary.

Configuring for libgd version 2.0.35.
Checking for stray libgd header files...

** WARNING: found gd.h header file in /usr/X11R6/includegd.h, but it is expected at /usr/include/gd.h. This may cause compile errors! **
** Possible problems found **

Included Features:          GD_XPM GD_JPEG GD_FONTCONFIG GD_FREETYPE GD_PNG GD_GIF GD_GIFANIM GD_OPENPOLYGON GD_UNCLOSEDPOLY GD_ANIMGIF GD_FTCIRCLE VERSION_33
GD library used from:       /usr
Checking if your kit is complete...
Looks good
Writing Makefile for GD

root@sms:/tmp/GD-2.46# make
/usr/bin/perl5.16.1 GD/Image.pm.PLS GD/Image.pm
Extracting Image.pm (with variable substitutions)
cp GD/Polyline.pm blib/lib/GD/Polyline.pm
cp qd.pl blib/lib/qd.pl
cp GD/Image.pm blib/lib/GD/Image.pm
cp GD.pm blib/lib/GD.pm
AutoSplitting blib/lib/GD.pm (blib/lib/auto/GD)
cp GD/Simple.pm blib/lib/GD/Simple.pm
cp GD/Polygon.pm blib/lib/GD/Polygon.pm
cp GD/Group.pm blib/lib/GD/Group.pm
/usr/bin/perl5.16.1 /usr/lib/perl5/ExtUtils/xsubpp  -typemap /usr/lib/perl5/ExtUtils/typemap -typemap typemap  GD.xs > GD.xsc && mv GD.xsc GD.c
cc -c  -I/usr/include -Wformat=0 -O2 -march=i486 -mtune=i686   -DVERSION=\"2.46\" -DXS_VERSION=\"2.46\" -fPIC "-I/usr/lib/perl5/CORE"  -DHAVE_JPEG -DHAVE_FT -DHAVE_XPM -DHAVE_GIF -DHAVE_PNG -DHAVE_ANIMGIF -DVERSION_33 -DHAVE_UNCLOSEDPOLY -DHAVE_FONTCONFIG -DHAVE_FTCIRCLE GD.c
Running Mkbootstrap for GD ()
chmod 644 GD.bs
rm -f blib/arch/auto/GD/GD.so
LD_RUN_PATH="/usr/lib" cc  -shared -O2 -march=i486 -mtune=i686 -L/usr/local/lib -fstack-protector GD.o  -o blib/arch/auto/GD/GD.so      \
   -L/usr/lib -L/usr/lib -lXpm -lX11 -ljpeg -lfontconfig -lfreetype -lpng14 -lz -lm -lgd        \

chmod 755 blib/arch/auto/GD/GD.so
cp GD.bs blib/arch/auto/GD/GD.bs
chmod 644 blib/arch/auto/GD/GD.bs
/usr/bin/perl5.16.1 "-Iblib/arch" "-Iblib/lib" bdf_scripts/bdf2gdfont.PLS bdf_scripts/bdf2gdfont.pl
Extracting bdf2gdfont.pl (with variable substitutions)
cp bdf_scripts/bdf2gdfont.pl blib/script/bdf2gdfont.pl
/usr/bin/perl5.16.1 -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/bdf2gdfont.pl
Manifying blib/man1/bdf2gdfont.pl.1
Manifying blib/man3/GD::Polyline.3
Manifying blib/man3/GD::Image.3
Manifying blib/man3/GD::Simple.3
Manifying blib/man3/GD.3
Manifying blib/man3/GD::Polygon.3

root@sms:/tmp/GD-2.46# make test
PERL_DL_NONLAZY=1 /usr/bin/perl5.16.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/GD.t ........ Not a CODE reference at /usr/lib/perl5/DynaLoader.pm line 213.
END failed--call queue aborted at blib/lib/GD.pm line 213.
Compilation failed in require at t/GD.t line 14.
BEGIN failed--compilation aborted at t/GD.t line 14.
t/GD.t ........ Dubious, test returned 2 (wstat 512, 0x200)
Failed 12/12 subtests
t/Polyline.t .. Not a CODE reference at /usr/lib/perl5/DynaLoader.pm line 213.
END failed--call queue aborted at /tmp/GD-2.46/blib/lib/GD.pm line 213.
Compilation failed in require at /tmp/GD-2.46/blib/lib/GD/Polyline.pm line 45.
BEGIN failed--compilation aborted at /tmp/GD-2.46/blib/lib/GD/Polyline.pm line 45.
Compilation failed in require at t/Polyline.t line 10.
BEGIN failed--compilation aborted at t/Polyline.t line 10.
t/Polyline.t .. Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests

Test Summary Report
-------------------
t/GD.t      (Wstat: 512 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 12 tests but ran 1.
t/Polyline.t (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 1 tests but ran 0.
Files=2, Tests=1,  1 wallclock secs ( 0.06 usr  0.08 sys +  0.37 cusr  0.13 csys =  0.64 CPU)
Result: FAIL
Failed 2/2 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Error 2
I still can't find the issue myself Confused

Well, it would be very nice to include stable lightsquid 1.8 into SMS distribution instead of so slow SARG. BTW, the last one has a typo in config -- /var/lib/squid/logs/access.log instead of /var/log/squid/logs/access.log, so it can't be successfully configured via Webmin.

_________________
In CODe we TRUST!
Back to top
View user's profile Send private message ICQ Number
gerasimos_h
Site Admin


Joined: 09 Aug 2007
Posts: 1757
Location: Greece

PostPosted: Fri Sep 28, 2012 1:24 pm    Post subject: Reply with quote

Have you upgrade perl-modules package?
Since you were trying to install GD yourself you should remove your GD installation and then install perl-modules again.
Your installation of GD is at
/usr/lib/perl5/GD
and
/usr/lib/perl/auto/GD
you should remove those folders and /usr/lib/perl5/GD.pm

SMS installation is at /usr/lib/perl5/vendor_perl/GD

I would recommend using perl-modules package, so you don't have problems with feature upgrades with perl.

Also GD has an issue in x86 installations, to fix it you must run
Code:
make CCFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"


Thanks for the bug report in sarg package, it's outdated so that's a good reason to replace it with lightsquid.

gerasimos_h

_________________
Superb! Mini Server Project Manager
http://sms.it-ccs.com
Back to top
View user's profile Send private message Visit poster's website
Ansy
Member


Joined: 24 Feb 2011
Posts: 42
Location: RUSSIA

PostPosted: Tue Oct 02, 2012 3:27 pm    Post subject: Reply with quote

Well done, gerasimos_h, thanks!

I've deleted all GD' stuff from perl directory you've noticed, removed perl-modules and reinstalled it again via slapt-get.

Now lightsquid passes tests OK and makes graphs! Smile

But I've had many troubles with httpd access rights to lightsquid web directory, now I can't remember what the exact trick got it solved... I'll tell you later, after upgrading and installing another SMS server.

P.S. May be that's enough about .htaccess file in httpd.conf... my be something else.

_________________
In CODe we TRUST!
Back to top
View user's profile Send private message ICQ Number
gerasimos_h
Site Admin


Joined: 09 Aug 2007
Posts: 1757
Location: Greece

PostPosted: Tue Oct 02, 2012 3:46 pm    Post subject: Reply with quote

By default SMS's httpd.conf allows override (AllowOverride All) so you will have to problem with /var/www/htdocs/lightsquid/.htaccess

gerasimos_h

_________________
Superb! Mini Server Project Manager
http://sms.it-ccs.com
Back to top
View user's profile Send private message Visit poster's website
Ansy
Member


Joined: 24 Feb 2011
Posts: 42
Location: RUSSIA

PostPosted: Tue Oct 02, 2012 4:05 pm    Post subject: Reply with quote

This string
Code:
AccessFileName .htaccess
was absent in httpd.conf as I've found, but may be not only, because I've tried to fix many other options before.
_________________
In CODe we TRUST!
Back to top
View user's profile Send private message ICQ Number
gerasimos_h
Site Admin


Joined: 09 Aug 2007
Posts: 1757
Location: Greece

PostPosted: Tue Oct 02, 2012 4:42 pm    Post subject: Reply with quote

Quote:
AccessFileName .htaccess

That's the default behavior, but if setting is set to "AllowOverride None" doesn't make any difference, that's why lightsquid install.txt state to use a <Directory /> option in httpd.conf, that's way you can skip .htaccess and it's faster.

Only option you have to change if you are upgrading from quite old releases (SMS-1.4.x) to work is "AllowOverride none" to "AllowOverride All" in <Directory "/srv/httpd/htdocs">

gerasimos_h

_________________
Superb! Mini Server Project Manager
http://sms.it-ccs.com
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    SMS Forum Index » Suggestions All times are GMT + 2 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum

SMS - Superb! Mini Server Project © 2016
Powered by phpBB © 2001, 2002 phpBB Group
iCGstation v1.0 Template By Ray © 2003, 2004 iOptional