| View previous topic :: View next topic | 
	
	
		| Author | Message | 
	
		| phil1361 Junior Member
 
 
 Joined: 15 Nov 2008
 Posts: 4
 
 
 | 
			
				|  Posted: Sat Nov 15, 2008 6:44 pm    Post subject: liveCD 1.3.13 |   |  
				| 
 |  
				| I wanted to try this Live cd, I downloaded and burned ISO
 put it in my machine rebooted
 first error was vesamenu.32 dos error
 I don't have windows so I manual did
 /boot/vmlinuz
 starts to boot then it can't find the root directory on cdrom so I get kernel panic...
 what do I do to get this live cd to work so I can try out this software before installing on my harddrive?
 |  | 
	
		| Back to top |  | 
	
		| gerasimos_h Site Admin
 
 
 Joined: 09 Aug 2007
 Posts: 1757
 Location: Greece
 
 | 
			
				|  Posted: Sat Nov 15, 2008 10:00 pm    Post subject: |   |  
				| 
 |  
				| Hello... Have you check the md5 checksum of SMS.Live.CD-1.3.13.iso you downloaded?
 Try to burn it on lower speed, or place it on your HDD and boot with the parameter from=/dev/yourdisk/SMS.Live.CD-1.3.13.iso
 There is nothing special to do for booting the livecd.
 
 gerasimos_h
 _________________
 Superb! Mini Server Project Manager
 http://sms.it-ccs.com
 |  | 
	
		| Back to top |  | 
	
		| phil1361 Junior Member
 
 
 Joined: 15 Nov 2008
 Posts: 4
 
 
 | 
			
				|  Posted: Sat Nov 15, 2008 11:11 pm    Post subject: |   |  
				| 
 |  
				| I downloaded the ISO again on different machine. MD5 sum checked good burned disk. exactly the same issue /boot/vesammenu.c32: attemped DOS system call
 
 any other ideas
 |  | 
	
		| Back to top |  | 
	
		| phil1361 Junior Member
 
 
 Joined: 15 Nov 2008
 Posts: 4
 
 
 | 
			
				|  Posted: Sun Nov 16, 2008 12:02 am    Post subject: |   |  
				| 
 |  
				| here's what I have now 
 at the boot:/boot/vmlinuz root=/dev/hdc init=initrd.splash
 system starts to boot I get this error
 
 MINIX-fs too small for device
 VFS: Mounted root (iso9660 filesystem) read only
 freeing unused kernel memory: 376k freed
 warning unable to open an initial console.
 failed to execute initrd.splash Attempting defaults
 Kernel panic not syncing: No init try passing init=
 |  | 
	
		| Back to top |  | 
	
		| phil1361 Junior Member
 
 
 Joined: 15 Nov 2008
 Posts: 4
 
 
 | 
			
				|  Posted: Sun Nov 16, 2008 12:21 am    Post subject: |   |  
				| 
 |  
				| I tried livecd in a different machine it seems to work fine. 
 The machine I want to use it on is an AMD Duron with two hard drives broken up into 5 partitions could this be the issue?
 |  | 
	
		| Back to top |  | 
	
		| gerasimos_h Site Admin
 
 
 Joined: 09 Aug 2007
 Posts: 1757
 Location: Greece
 
 | 
			
				|  Posted: Sun Nov 16, 2008 11:25 am    Post subject: |   |  
				| 
 |  
				|  	  | phil1361 wrote: |  	  | I tried livecd in a different machine it seems to work fine. 
 The machine I want to use it on is an AMD Duron with two hard drives broken up into 5 partitions could this be the issue?
 | 
 
 I doubt, since livecd will only use swap partitions. Just unplug your drives and boot with no drives to check if that's the issue.
 It's more likely to be bios issues. just check you bios setup if there are options regarding boot devices.
 
 gerasimos_h
 _________________
 Superb! Mini Server Project Manager
 http://sms.it-ccs.com
 |  | 
	
		| Back to top |  | 
	
		|  |