[SMS]

vivanguarda · Member Joined: 01 May 2009 Posts: 98

Sorry a double post!

But, are there a simpler way to send mails in sms using an SMTP client like msmtp or mailx so, I think, it is more easy to configure and compatible with the sendmail command line options?

Therefore it up to either relay through their ISP's mail server or deliver the mail directly.

vivanguarda · Member Joined: 01 May 2009 Posts: 98

Gerasimos,

Thankkks a lOOttt for all assistance!

Problem is solved! I was trying to use it like a server. Then I tried to use like a client only and did another sendmail-slackware.mc for a client mode. Then I belive a changed line server for client in sendmail-slackware.mc edition was the point.

define(`confAUTH_OPTIONS', `A p y')dnl

I redid authinfo too.

gerasimos_h · Posted: Sat Mar 30, 2013 10:44 pm Post subject:

I'm glad you got it working, I don't know which auth info you had at first, but you need any info to send mail from an account, in your case a yahoo account.

gerasimos_h

vivanguarda · Member Joined: 01 May 2009 Posts: 98

I understand it is used in server side. Last line mainly

vivanguarda · Member Joined: 01 May 2009 Posts: 98

After fireworks, I am intend to figure out another endeavor. Then I am using a Sms version since JUN 2010 and it is a kernel module 2.6.33 type. What's the commander to start up Sendmail and Postfix in this old SMS machine? Oh... ok!!! I don't intend to start programms simultaneously!

And commands in case of using an updated 2.0.3 released?

gerasimos_h · Posted: Fri Apr 19, 2013 7:47 am Post subject:

Commands (scripts) for starting both mailservers are the same:

vivanguarda · Member Joined: 01 May 2009 Posts: 98

I am sorry reopen this topic, but I am trying to run Sendmail in sms 2.0.5 and didn't get a localhost 127.0.0.1 connection . I checked alot of points and this is postconf -n output

gerasimos_h · Posted: Tue Aug 27, 2013 6:38 am Post subject:

Have you used sms-chooseMTA.sh command?
What's the output of

vivanguarda · Member Joined: 01 May 2009 Posts: 98

I haven't used sms-chooseMTA.sh yet. Now Sendmail MTA is running, but unfortunately I didn't get a correct relay. This is a mailog and I am trying a Smart Host config.

root@server:~# tail -30 /var/log/maillog
Aug 27 22:46:01 server sendmail[2442]: r7S1k1Pv002442: to=root@localhost, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30203, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Aug 27 22:46:01 server MailScanner[2426]: Reading configuration file /opt/MailScanner/etc/MailScanner.conf
Aug 27 22:46:01 server MailScanner[2426]: Reading configuration file /opt/MailScanner/etc/conf.d/README
Aug 27 22:46:02 server sendmail[2450]: r7S1k1FG002450: from=fail2ban, size=193, class=0, nrcpts=1, msgid=<201308280146.r7S1k1FG002450@server>, relay=root@localhost
Aug 27 22:46:02 server sendmail[2450]: r7S1k1FG002450: to=root@localhost, delay=00:00:01, xdelay=00:00:00, mailer=relay, pri=30193, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Aug 27 22:46:02 server MailScanner[2426]: Read 872 hostnames from the phishing whitelist
Aug 27 22:46:02 server MailScanner[2426]: Read 4260 hostnames from the phishing blacklists
Aug 27 22:46:03 server MailScanner[2426]: Using SpamAssassin results cache
Aug 27 22:46:03 server MailScanner[2426]: Connected to SpamAssassin cache database
Aug 27 22:46:03 server MailScanner[2426]: Enabling SpamAssassin auto-whitelist functionality...
Aug 27 22:46:06 server MailScanner[2453]: MailScanner E-Mail Virus Scanner version 4.84.6 starting...
Aug 27 22:46:06 server MailScanner[2453]: Reading configuration file /opt/MailScanner/etc/MailScanner.conf
Aug 27 22:46:06 server MailScanner[2453]: Reading configuration file /opt/MailScanner/etc/conf.d/README
Aug 27 22:46:06 server MailScanner[2453]: Read 872 hostnames from the phishing whitelist
Aug 27 22:46:07 server MailScanner[2453]: Read 4260 hostnames from the phishing blacklists
Aug 27 22:46:08 server MailScanner[2453]: Using SpamAssassin results cache
Aug 27 22:46:08 server MailScanner[2453]: Connected to SpamAssassin cache database
Aug 27 22:46:08 server MailScanner[2453]: Enabling SpamAssassin auto-whitelist functionality...
Aug 27 22:46:09 server MailScanner[2426]: Connected to Processing Attempts Database
Aug 27 22:46:09 server MailScanner[2426]: Found 0 messages in the Processing Attempts Database
Aug 27 22:46:09 server MailScanner[2426]: Using locktype = flock
Aug 27 22:46:10 server MailScanner[2453]: Connected to Processing Attempts Database
Aug 27 22:46:10 server MailScanner[2453]: Found 0 messages in the Processing Attempts Database
Aug 27 22:46:10 server MailScanner[2453]: Using locktype = flock
Aug 27 22:47:01 server freshclam[2501]: ClamAV update process started at Tue Aug 27 22:47:01 2013
Aug 27 22:47:01 server freshclam[2501]: main.cvd is up to date (version: 54, sigs: 1044387, f-level: 60, builder: sven)
Aug 27 22:47:01 server freshclam[2501]: daily.cld is up to date (version: 17757, sigs: 1658651, f-level: 63, builder: neo)
Aug 27 22:47:01 server freshclam[2501]: bytecode.cld is up to date (version: 225, sigs: 42, f-level: 63, builder: dgoddard)
Aug 27 22:47:55 server sendmail[2786]: r7S1ltV9002786: from=root, size=229, class=0, nrcpts=1, msgid=<201308280147.r7S1ltV9002786@server>, relay=root@localhost
Aug 27 22:47:55 server sendmail[2786]: r7S1ltV9002786: to=administrator@sms.org, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30229, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]

gerasimos_h · Posted: Wed Aug 28, 2013 7:50 am Post subject:

First of all you need to run sms-chooseMTA.sh, you can't have two MTA running,
dont worry it won't remove one another one disable it...

Check if both running with
smsconfig postfix st
smsconfig sendmail st

Once you have only sendmail running check you smart config..

gerasimos_h

vivanguarda · Member Joined: 01 May 2009 Posts: 98

I am running only Sendmail now, but it isn´t connect yet so I don´t have a correct output in telnet localhost 25. I don´t see sendmail there! In fact I think it´s a sendmail config. Do you have a sendmail.cf default config?

vivanguarda · Member Joined: 01 May 2009 Posts: 98

Sorry a double post, but it is strange. I did another slack 14 fresh install and used the same sendmail.mc config ( SMTP CLIENT ). In this new machime system is ok. Then, do you use any sms service blocking port 25 in sms config? Why can I see it into SMS /var/log/maillog?

Aug 31 16:48:32 server sm-msp-queue[25507]: r7RKn2uf002512: to=root@localhost, delay=3+22:59:30, xdelay=00:00:00,
mailer=relay, pri=4440193, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Aug 31 16:48:32 server sm-msp-queue[25507]: r7RKn2dW002486: to=root@localhost, delay=3+22:59:30, xdelay=00:00:00,
mailer=relay, pri=4440193, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Aug 31 16:48:33 server sm-msp-queue[25507]: r7RKn1jE002479: to=root@localhost, delay=3+22:59:32, xdelay=00:00:00,
mailer=relay, pri=4440195, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Aug 31 16:48:33 server sm-msp-queue[25507]: r7RKn2Hv002504: to=root@localhost, delay=3+22:59:31, xdelay=00:00:00,
mailer=relay, pri=4440203, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Aug 31 16:48:33 server sm-msp-queue[25507]: r7RKn2Ix002496: to=root@localhost, delay=3+22:59:31, xdelay=00:00:00,
mailer=relay, pri=4440209, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Aug 31 16:48:33 server sm-msp-queue[25507]: r7RKqnhx003294: to=vivanguarda2@ig.com.br, ctladdr=root (0/0), delay=3
+22:55:44, xdelay=00:00:00, mailer=relay, pri=4440238, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: Connection ref
used by [127.0.0.1]

gerasimos_h · Posted: Sat Aug 31, 2013 10:40 pm Post subject:

SMS ain;t blocking any ports...
For start connect to port 25 with telnet

vivanguarda · Member Joined: 01 May 2009 Posts: 98

Can you analize some outputs?

telnet 127.0.0.1 25
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused

vi /etc/hosts
# hosts This file describes a number of hostname-to-address
# mappings for the TCP/IP subsystem. It is mostly
# used at boot time, when no name servers are running.
# On small systems, this file can be used instead of a
# "named" name server. Just add the names, addresses
# and any aliases to this file...
#
# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
# should NEVER be named with the name of the machine. It causes problems
# for some (stupid) programs, irc and reputedly talk. :^)
#

# For loopbacking.
127.0.0.1 localhost
127.0.0.1 server.local.server_localdomain server.local
[b]
# End of hosts.[/b]

#hostname
server

nmap localhost

Starting Nmap 6.25 ( http://nmap.org ) at 2013-08-31 18:03 BRT
Nmap scan report for localhost (127.0.0.1)
Host is up (0.000010s latency).
Not shown: 991 closed ports
PORT STATE SERVICE
22/tcp open ssh
37/tcp open time
53/tcp open domain
113/tcp open ident
139/tcp open netbios-ssn
445/tcp open microsoft-ds
631/tcp open ipp
783/tcp open spamassassin
10000/tcp open snet-sensor-mgmt

Nmap done: 1 IP address (1 host up) scanned in 0.29 seconds

And a partial senmail.cf and also sendmail.mc. I am looking for "clamav - milter and unsafe" output after sendmail restart

# /etc/rc.d/rc.sendmail restart
Starting sendmail MTA daemon: /usr/sbin/sendmail -L sm-mta -bd -q25m
451 4.0.0 /etc/mail/sendmail.cf: line 1693: Xclamav: local socket name /var/run/clamav-milter/milter.sock unsafe: World writable directory

Thanks.

vivanguarda · Member Joined: 01 May 2009 Posts: 98

Gerasimos, Good Morning!

It was really a clamav-milter problem. I found this thread about unsafe issue and sendmail. SOLVED!

https://forums.gentoo.org/viewtopic-t-946524-start-0.html

http://www.linuxquestions.org/questions/linux-newbie-8/amavisd-with-sendmail-problem-508591/#post2535239