Log inUsernamePassword
Log me on automatically each visit    
Register
Register
Log in to check your private messages
Log in to check your private messages
SMS Forum Index » SMS User Support

Post new topic   Reply to topic
Add a Printer to Printer Administration
View previous topic :: View next topic  
Author Message
lkraemer
Member


Joined: 25 Jun 2010
Posts: 37

PostPosted: Thu May 12, 2011 3:22 am    Post subject: Add a Printer to Printer Administration Reply with quote

I have SMS 1.60 installed with just ProFTP, vsftp, Samba, and ssh enabled,
Passwords Changed, and I have set up everything in webmin as far as I
can determine. I've been able to use Filezilla, and transfer some test files
to /home on my SMS Server via vsftp as a test. SUCCESS!

Now, I would like to add my Brother HL-2140 (USB) to the CUPS printer
setup as default. But, I can't get the Printer Administration to accept the
printer connected by USB as default. The error is:

Failed to save printer : lpadmin failed :

lpadmin: Unable to open PPD file "/etc/cups/ppd/HL2140.ppd" - No such file or directory

So, how do I install a new printer and get my Brother HL-2140 Laserjet working via CUPS?

Also, I would like to get NFS working so I can access my SMS Server via NFS
from Debian 6.0. It works fine on FreeNAS ver 7.1, but I'd rather use
SMS with a network Printer. What am I missing on the NFS? I can't export
/home or get access? Ideas or Suggestions?

Thanks.

Larry
Back to top
View user's profile Send private message
gerasimos_h
Site Admin


Joined: 09 Aug 2007
Posts: 1757
Location: Greece

PostPosted: Thu May 12, 2011 5:47 am    Post subject: Reply with quote

You need to provide HL2140.ppd during installation, at CUPS.
As for nfs have you added /home in /etc/exports?
Code:
/home *(rw,no_root_squash,no_subtree_check)

and start
/etc/rc.d/rc.rpc start
/etc/rc.d/rc.nfsd start

gerasimos_h

_________________
Superb! Mini Server Project Manager
http://sms.it-ccs.com
Back to top
View user's profile Send private message Visit poster's website
lkraemer
Member


Joined: 25 Jun 2010
Posts: 37

PostPosted: Thu May 12, 2011 2:52 pm    Post subject: Added hl-2140.ppd Reply with quote

OK, I located and copied the HL-2140.ppd file from My Debian 6.0 setup
for FreeNAS to sms under /etc/cups/ppd Then, I went to the sms webmin,
and added the printer as a USB device #1 and CUPS printer.

I then logged in sms as root and did a lp debian.txt and lpr debian.txt
along with lpstat -p -d
My Brother HL-2140 shows as the default printer and is idle.
I cycled power on the Brother printer, then stopped, and restarted CUPS, and
Samba.

I am still not able to print. a test page. If I go to webmin and click on
my printer so as to show the list in the que, I have two documents
waiting to print. I delete them at that point, because they will never print.

Ideas or Suggestions?

Is there a good document or guide on setting up a CUPS printer in Slackware? I've searched the net and haven't located one.

What am I doing wrong? Why do I always have trouble doing something
easy?

I haven't got to the NFS portion and at this point I'm not looking forward
to brute forcing my way through it either.


Thanks.

Larry
Back to top
View user's profile Send private message
gerasimos_h
Site Admin


Joined: 09 Aug 2007
Posts: 1757
Location: Greece

PostPosted: Thu May 12, 2011 6:00 pm    Post subject: Reply with quote

Configure printer through CUPS http://localhost:631 not webmin.

gerasimos_h

_________________
Superb! Mini Server Project Manager
http://sms.it-ccs.com
Back to top
View user's profile Send private message Visit poster's website
lkraemer
Member


Joined: 25 Jun 2010
Posts: 37

PostPosted: Thu May 12, 2011 6:10 pm    Post subject: Reply with quote

I'd be glad to try to configure printer through CUPS http://localhost:631,
except I guess I'm going to have to locate and install a Video Card in the
Motherboard because I can't get xconf & startx to allow me to get to
the KDE Window Manager for CUPS configuration.

REF:
http://sms.it-ccs.com/forum/viewtopic.php?t=520

Thanks.

Larry
Back to top
View user's profile Send private message
gerasimos_h
Site Admin


Joined: 09 Aug 2007
Posts: 1757
Location: Greece

PostPosted: Thu May 12, 2011 6:47 pm    Post subject: Reply with quote

You don't need KDE, just navigate to http://[yourserver]:631

gerasimos_h

_________________
Superb! Mini Server Project Manager
http://sms.it-ccs.com
Back to top
View user's profile Send private message Visit poster's website
lkraemer
Member


Joined: 25 Jun 2010
Posts: 37

PostPosted: Thu May 12, 2011 7:06 pm    Post subject: Reply with quote

OK, I inserted a New Old Stock AGP Graphics Card, and got xconf &
startx working so I could configure the printer with http://localhost:631
and I can print from within sms.

If I had known about your posting of ... http://[yourserver]:631
I would have tried that to configure the printer, but as you can tell
I am new to sms and servers etc.

THANKS.

Larry
Back to top
View user's profile Send private message
lkraemer
Member


Joined: 25 Jun 2010
Posts: 37

PostPosted: Thu May 12, 2011 10:01 pm    Post subject: Reply with quote

Now, I still can't print from my Laptop, but I can go to my SMS Server
and print files to my USB Brother Laserjet after I configured via
https://ldksms.local:631/admin

I have the printer set for:
Share printers connected to this system
& Allow Printing from Internet

But, for some reason I can't get my laptop to print to the Brother
Laserjet. I have a Wifi connection to my network and the sms Server
with USB printer attached is sitting idle. What am I missing/overlooking?

I'm about at my last straw. It's been too long trying over and over.....

Thanks.

Larry.
Back to top
View user's profile Send private message
gerasimos_h
Site Admin


Joined: 09 Aug 2007
Posts: 1757
Location: Greece

PostPosted: Fri May 13, 2011 5:54 am    Post subject: Reply with quote

Assuming your laptop has Windows add a new network printer and choose
"connect to a printer on the internet..."
and type your URL
http://[yourserverip]:631/printers/[yourprintername]
and continue with driver.

If it's UNIX client use CUPS on client to add the printer the same way.

gerasimos_h

_________________
Superb! Mini Server Project Manager
http://sms.it-ccs.com
Back to top
View user's profile Send private message Visit poster's website
lkraemer
Member


Joined: 25 Jun 2010
Posts: 37

PostPosted: Fri May 13, 2011 3:08 pm    Post subject: Reply with quote

OK, my laptop is a Linux laptop running Debian 6.0. and I'd like a little more specific information.

You state: "If it's UNIX client use CUPS on client to add the printer the same way." How exactly do I use CUPS? If I go to http://localhost:631/admin on my laptop and click on "Show printers shared by other systems" and click on CHANGE SETTINGS, I get forbidden access!

I've tried https://localhost:631/admin also with the same results.

So at this point I'm stuck. How do I get access and when I do, do I insert my Laptop password or the SMS Server root Password?

Thanks.

Larry
Back to top
View user's profile Send private message
gerasimos_h
Site Admin


Joined: 09 Aug 2007
Posts: 1757
Location: Greece

PostPosted: Fri May 13, 2011 6:05 pm    Post subject: Reply with quote

Go to http://localhost:631 on your laptop and provide your root authentication to admin CUPS on debian.
Or you can go to (this is from ubuntu)
System/Administration/Printing
Add
Network Printer
Find Network Printer
and enter name or IP of your server and will find it automatically.

gerasimos_h

_________________
Superb! Mini Server Project Manager
http://sms.it-ccs.com
Back to top
View user's profile Send private message Visit poster's website
lkraemer
Member


Joined: 25 Jun 2010
Posts: 37

PostPosted: Sat May 14, 2011 1:20 am    Post subject: Reply with quote

WHOO HOO! After trying several more hours I was ready to give up.....But,
I took the time to totally rebuild my SMS Server, and try the USB Printer
setup again. Everything went slick on the rebuild but after setting up the
USB HL-2140 Printer I still couldn't get my Asus Laptop to print. I then
went to the SMS Server, and tried to print a text document from the GUI.
It didn't work. At that point I didn't have a clue, so I unplugged the Printer
Cable, and then plugged it back in. I then could print a text file from my
SMS Server. After trying my Asus setup again I finally got it printing. WHEW!!! Finally!

THANKS. Looking good now!!!!!

Larry
Back to top
View user's profile Send private message
lkraemer
Member


Joined: 25 Jun 2010
Posts: 37

PostPosted: Sat May 14, 2011 3:14 pm    Post subject: Reply with quote

Here is a text document of the exact procedures I used to install my
SMS Servers local Printer, along with information on setting up my Laptops
with network printers.

Maybe you want to edit/cleanup/modify as necessary to make a HOWTO:
to post in that section.

Hopefully it will save someone several hours of trouble.

THANKS.

Larry



Setup_SMS_Printer.zip
 Description:
HOWTO: Install your SMS Local Printer & Laptop Network Printer.

Download
 Filename:  Setup_SMS_Printer.zip
 Filesize:  1.3 KB
 Downloaded:  1989 Time(s)

Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    SMS Forum Index » SMS User Support All times are GMT + 2 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum

SMS - Superb! Mini Server Project © 2016
Powered by phpBB © 2001, 2002 phpBB Group
iCGstation v1.0 Template By Ray © 2003, 2004 iOptional