[SMS]

[JULinux]

Server booted but now it dosen't show up on my network and I can't log into it.

[JULinux]

ifconfig -a tells me that eth1 and 2 are there but not active and there is no eth0.

[baboo]

I am assuming you were able to login.

at command line type 'ifconfig eth1 'ipaddress' up

do the same for eth2.

One other note: in 'etc/rc.d/rc.inet1.conf' make sure eth0 lines have nothing and that eth1&2 do not have 'yes' after dhcp'.

also to activate cards you can run 'netconfig-lcd' and fill out data.

[gerasimos_h]

What's the output of "cat /etc/udev/rules.d/70-persistent-net.rules"?
You can delete lines that describe ethernet adapters that don't exist and alter the name (eth1, eth2 e.t.c) of the adapter you want to show up as eth1 or eth2.

Assuming that your network cards have link (RJ45 connected to NIC) you just need to edit rc.inet1.conf appropriate with your network info.

gerasimos_h

[JULinux]

[JULinux]

As long as I'm solving this problem I might as well ask you if there is any secure database management system I could get like vtiger or Microsoft onenote that I could install on this sms server or a diffrent server to provide a central database and webapp for a Church to use to log people and clothing at a clothing bank, people and food at a food bank, and confidential church info on different people in crysis situations.

The idea would be to upload a picture, write some info, and keep track of people cared for.

I also have a Yahoo small business server that supposedly can run PHP and other code on it. I don't know about it's security though.

[JULinux]

FYI I'm getting vtiger installed on the Yahoo server.

[gerasimos_h]

So your r8169 is eth2? you only see one ethernet card?
Above
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:e0:52:ab:d1:30", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME=="eth2"
you should see something like
# PCI device 0x10ec:0x8168 (r8169)
Have you plugged your ethernet cards correctly, does bios recognize them?

You could install vtiger on SMS, but on the other hand you should have better bandwidth on the yahoo server, so it was a good choice.

gerasimos_h

[keopp]

Hi.

I've experienced such issues.
First be sure /etc/rc.d/rc.udev can be executed. (chmod +x /etc/rc.d/rc.udev).
Then, delete the file /etc/udev/rules.d/70-persistent-net.rules. Don't worry it will be generated again after restart.
Restart your system then check if the new /etc/udev/rules.d/70-persistent-net.rules contains references to all your NIC's. If not, here is the problem!
Then, you can follow Gerasimo's advices about asigning eth's.

Good luck!

[JULinux]

[JULinux]

[gerasimos_h]

Depending on the eth (eth0) info in /etc/udev/rules.d/70-persistent-net.rules edit the appropriate eth entry in /etc/rc.d/rc.inet1.conf to get a static IP address, or run "dhcpcd eth0" to get an IP from your router.
If you have static IP configured and not having internet add the DNS servers or your router in /etc/resolv.conf.

gerasimos_h

[JULinux]

[JULinux]

for now I just want to get Dansguardian set up as a proxy server. I know how to do this with the caching server. Is the port the same for both? There is no where to set it in Dansguardian.

[JULinux]

Ok Dansguardian's proxy isn't working. I went into Firefox for a different browser to test on.

HTTP Proxy 192.168.0.158 Port 3128
Checked box Use this proxy server for all protocols.

Also just to get the server working I had to manually run dhcpcd eth1 to get it to work at all.

I think the caching server is working but I can't tell. I looked at squid and it says it's up but it also says:

Your Squid cache directory /var/log/squid/cache has not been initialized.This must be done before Squid can be run

I try to initialize it. It even says it does but it always says it needs to.

I guess I need to go into the terminal and rm everything in /var/log/squid/cache ???